Lead4Pass updates Amazon PAS-C01 dumps throughout the year, and more importantly, shares a part of the exam questions and answers for free each time, providing candidates with online practice tests!
The May PAS-C01 dumps have been updated and verified as authentic and valid by the Amazon team! Now! Candidates can practice PAS-C01 test questions online!
Or use the Lead4Pass PAS-C01 dumps with PDF and VCE formats: https://www.leads4pass.com/pas-c01.html (contains 65 most recent exam questions and answers!).
Amazon PAS-C01 Exam Questions Online Practice Test:
Question 1:
A company is running an SAP ERP Central Component (SAP ECC) system on an SAP HANA database that is 10 TB m size The company is receiving notifications about long-running database backups every day The company uses AWS Backint Agent for SAP HANA (AWS Backint agent) on an Amazon EC2 instance to back up the database An SAP NetWeaver administrator needs to troubleshoot the problem and propose a solution
Which solution will help resolve this problem\’?
A. Ensure mat AWS Backint agent is configured to send the backups to an Amazon S3 bucket over the internet Ensure that the EC2 instance is configured to access the internet through a NAT gateway
B. Check the UploadChanneiSize parameter for the AWS Backint agent and increase this value in the aws-backing-agent-config yaml configuration file based on the EC2 instance type and storage configurations
C. Check the MaximumConcurrentFilesForRestore parameter for the AWS Backint agent Increase the parameter from 5 to 10 by using the aws-backint-agent-config yaml configuration file
D. Ensure that the backups are compressed if necessary configure the AWS Backint agent to compress the backups and send them to an Amazon S3 bucket
Question 2:
A company hosts its SAP NetWeaver workload on SAP HANA m the AWS Cloud The SAP NetWeaver application is protected by a cluster solution that uses Red Hat Enterprise Linux High Availability Add-On The duster solution uses an overlay IP address to ensure that the high availability cluster is still accessible during failover scenarios. An SAP solutions architect needs to facilitate the network connection to this overlay IP address from multiple locations These locations include more than 25 VPCs other AWS Regions and the on-premises environment The company already has set up an AWS Direct Connect connection between the on-premises environment and AWS.
What should the SAP solutions architect do to meet these requirements in the MOST scalable manner?
A. Use VPC peering between the VPCs to route traffic between them
B. Use AWS Transit Gateway to connect the VPCs and on-premises networks together
C. Use a Network Load Balancer to route connections to various targets within VPCs
D. Deploy a Direct Connect gateway to connect the Direct Connect connection over a private VIF to one or more VPCs in any accounts
Question 3:
A company is designing a disaster recovery (DR) strategy for an SAP HANA database that runs on an Amazon EC2 instance in a single Availability Zone The company can tolerate a long RTO and an RPO greater than zero if it means that the company can save money on its DR process.
The company has configured an Amazon CloudWatch alarm to automatically recover the EC2 instance if the instance experiences an unexpected issue. The company has set up AWS Backint Agent for SAP HANA to save the backups into Amazon S3.
What is the MOST cost-effective DR option for the company\’s SAP HANA database?
A. Set up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA database in a second Availability Zone from backups that are stored in Amazon S3 When the SAP HANA database is operational perform a database restore by using the standard SAP HANA restore process.
B. Launch a secondary EC2 instance for the SAP HANA database on a less powerful EC2 instance type in a second Availability Zone Configure SAP HANA system replication with the preload option turned off
C. Launch a secondary EC2 instance tor the SAP HANA database on an equivalent EC2 instance type in a second Availability Zone Configure SAP HANA system replication with the preload option turned on
D. Set up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA database in a second Availability Zone from backups that are stored in Amazon Elastic Block Store (Amazon EBS) When the SAP HANA database is operational perform a database restore by using the standard SAP HANA restore process
Question 4:
A company has deployed a highly available SAP NetWeaver system on SAP HANA into a VPC The system is distributed across multiple Availability Zones within a single AWS Region SAP NetWeaver is running on SUSE Linux Enterprise Server for SAP SUSE Linux Enterprise High Availability Extension is configured to protect SAP ASCS and ERS instances and uses the overlay IP address concept The SAP shared dies spent and . usrsap. trans is hosted on an Amazon Elastic File System (Amazon EFS) tile system
The company needs a solution that uses already-existing private connectivity to the VPC. The SAP NetWeaver system must be accessible through the SAP GUI client tool.
Which solutions will meet these requirements? (Select TWO)
A. Deploy an Application Load Balancer Configure the overlay IP address as a target
B. Deploy a Network Load Balancer Configure the overlay IP address as a target
C. Use an Amazon Route 53 private zone Create an A record that has the overlay IP address as a target
D. Use AWS Transit Gateway Configure the overlay IP address as a static route in the transit gateway route table Specify the VPC as a target
E. Use a NAT gateway Configure the overlay IP address as a target
Question 5:
A company wants 10 migrate its SAP ERP landscape to AWS The company will use a highly available distributed deployment for the new architecture Clients will access SAP systems from a local data center through an AWS Site-to-Site VPN connection that is already in place An SAP solutions architect needs to design the network access to the SAP production environment
Which configuration approaches will meet these requirements? (Select TWO.)
A. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create an AWS Transit Gateway Attach me VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
B. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create an AWS Transit Gateway Attach the VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
C. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create a target group that points to the overlay IP address Create a Network Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
D. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address Create a Network Load Balancer, and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance
E. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address Create an Application Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance.
Question 6:
An SAP basis architect is configuring high availability for a critical SAP system on AWS. The SAP basis architect is using an overlay IP address to route traffic to the subnets across multiple Availability Zones within an AWS Region for the system\’s SAP HANA database.
What should the SAP basis architect do to route the traffic to the Amazon EC2 instance of the active SAP HANA database?
A. Edit the route in the route table of the VPC that includes the EC2 instance that runs SAP HANA Specify the overlay IP address as the destination Specify the private IP address of the EC2 instance as the target
B. Edit the inbound and outbound rules in the security group of the EC2 instance that runs SAP HANA Allow traffic for SAP HANA-specific ports from the overlay IP address
C. Edit the network ACL of the subnet that includes the EC2 instance that runs SAP HANA Allow traffic for SAP HANA-specific ports from the overlay IP address
D. Edit the route in the route table of the VPC that includes the EC2 instance that runs SAP HANA Specify the overlay IP address as the destination Specify the elastic network interface of the EC2 instance as the target
Question 7:
A company wants 10 implement SAP HANAonAWS with the Multi-AZ deployment option by using AWS Launch Wizard for SAP The solution will use SUSE Linux Enterprise High Availability Extension for the high availability deployment An SAP solutions architect must ensure that all the prerequisites are met The SAP solutions architect also must ensure that the user inputs to start the guided deployment of Launch Wizard are valid.
Which combination of steps should the SAP solutions architect take to meet these requirements? (Select TWO)
A. Before starting the Launch Wizard deployment create the underlying Amazon Elastic Block Store (Amazon EBS) volume types to use for SAP HANA data and log volumes based on the performance requirements
B. Use a value for the PaceMakerTag parameter that is not used by any other Amazon EC2 instances in the AWS Region where the system is being deployed
C. Ensure that the virtual hostname for the SAP HANA database that is used for the SUSE Linux Enterprise High Availability Extension configuration is not used in any other deployed accounts
D. Ensure that the Virtual Address parameter is outside the VPC CIDR and is not being used in the routing table that is associated with the subnets where primary and secondary SAP HANA instances will be deployed
E. Before starting the Launch Wizard deployment set up the SUSE Linux Enterprise High Availability Extension network configuration and security group
Question 8:
A company is migrating its SAP workloads to AWS The company\’s IT team installs a highly available SAP S.4HANA system that uses the SAP HANA system replication cluster package on SUSE Linux Enterprise Server The IT team deploys the system by using cluster nodes m different Availability Zones within the same AWS Region.
After the initial launch of the SAP application the application is accessible However after failover the IT team cannot access the application even though the system is up and running on the secondary node After investigation an SAP solutions architect discovers that the virtual IP address has not been used correctly
Which combination of steps should the SAP solutions architect take to resolve this problem? (Select TWO.)
A. Use an overlay IP address as a secondary IP address with the primary node of the cluster
B. Choose an overlay IP address within the VPC CIDR block that corresponds with the secondary node of the cluster
C. Use an overlay IP address as a virtual IP address
D. Choose an overlay IP address within the VPC CIDR block that corresponds with the primary node of the cluster
E. Choose an overlay IP address outside the VPC CIDR block that hosts the application and the database
Question 9:
A company has an SAP Business One system that runs on SUSE Linux Enterprise Server 12 SP3. The company wants to migrate the system to AWS An SAP solutions architect selects a homogeneous migration strategy that uses AWS Application Migration Service (CloudEndure Migration)
After the server migration process is finished the SAP solutions architect launches an Amazon EC2 test instance from the R5 instance family. After a few minutes the EC2 console reports that the test instance has failed an instance status check Network connections to the instance are refused
How can the SAP solutions architect solve this problem?
A. Reboot the instance to initiate instance migration to another host
B. Request an instance limit increase for the AWS Region where the test instance is being launched
C. Create a ticket for AWS Support that documents the test server instance ID Wait for AWS to update the host of the R5 instance
D. Install the missing drivers on the source system Wait for the completion of migration synchronization Launch the test instance again
Question 10:
A company has an SAP environment that runs on AWS. The company wants to enhance security by restricting Amazon EC2 Instance Metadata Service (IMDS) to IMDSv2 only. The company\’s current configuration option supports both iMDSvi and iM0Sv2. The security enhancement must not create an SAP outage.
What should the company do before it applies the security enhancement on EC2 instances that are running the SAP environment?
A. Ensure that the SAP kernel versions are 7 45 or later
B. Ensure that the EC2 instances are Nitro based
C. Ensure that the AWS Data Provider for SAP is installed on each EC2 instance
D. Stop the EC2 instances
Question 11:
A company is running SAP ERP Central Component (SAP ECC) with a Microsoft SQL Server database on AWS A solutions architect must attach an additional 1 TB Amazon Elastic Block Store (Amazon EBS) volume. The company needs to write the SQL Server database backups to this EBS volume before moving the database backups to Amazon S3 for long-term storage.
Which EBS volume type will meet these requirements MOST cost-effectively?
A. Throughput Optimized HDD (st1)
B. Provisioned IOPS SSD (io3)
C. General Purpose SSD (gp3)
D. Cold HDD (sc1)
Question 12:
A company wants to migrate its SAP landscape from on-premises to AWS
What are the MINIMUM requirements that the company must meet to ensure full support of SAP on AWS? (Select THREE.)
A. Enable detailed monitoring for Amazon CloudWatch on each instance in the landscape
B. Deploy the infrastructure by using SAP Cloud Appliance Library
C. Install configure and run the AWS Data Provider for SAP on each instance m the landscape
D. Protect all production instances by using Amazon EC2 automatic recovery
E. Deploy the infrastructure for the SAP landscape by using AWS Launch Wizard for SAP
F. Deploy the SAP landscape on an AWS account that has either an AWS Business Support plan or an AWS Enterprise Support plan
Question 13:
A company is starting a new project to implement an SAP landscape with multiple accounts that belong to multiple teams in the us-east-2 Region. These teams include procurement finance sales and human resources An SAP solutions architect has started designing this new landscape and the AWS account structures
The company wants to use automation as much as possible The company also wants to secure the environment implement federated access to accounts centralize logging and establish cross-account security audits in addition the company\’s management team needs to receive a top-level summary of policies that are applied to the AWS accounts.
What should the SAP solutions architect do to meet these requirements?
A. Use AWS CloudFormation StackSets to apply SCPs to multiple accounts in multiple Regions. Use an Amazon CloudWatch dashboard to check the applied policies in the accounts
B. Use an AWS Elastic Beanstalk blue-green deployment to create 1 AM policies and apply them to multiple accounts together Use an Amazon CloudWatch dashboard to check the applied policies in the accounts
C. Implement guardrails by using AWS CodeDeploy and AWS CodePipeline to deploy SCPs into each account Use the CodePipeline deployment dashboard to check the applied policies in the accounts
D. Apply SCPs through AWS Control Tower Use the AWS Control Tower integrated dashboard to check the applied policies in the accounts
Question 14:
A data analysis company has two SAP landscapes that consist of sandbox development QA, pre-production, and production servers. One landscape is on Windows and the other landscape is on Red Hat Enterprise Linux. The servers reside in a room m a building that other tenants share.
An SAP solutions architect proposes to migrate the SAP applications to AWS The SAP solutions architect wants to move the production backups to AWS and wants to make the backups highly available to restore >n case of unavailability of an on-premises server.
Which solution will meet these requirements MOST cost-effectively?
A. Take a backup of the production servers Implement an AWS Storage Gateway Volume Gateway Create file shares by using the Storage Gateway Volume Gateway Copy the backup files to the file shares through NFS and 9MB.
B. Take a backup of the production servers Send those backups to tape drives implement an AWS Storage Gateway Tape Gateway Send the backups to Amazon S3 Standard- Infrequent Access (S3 Standard-IA) through the S3 console Move the backups immediately to S3 Glacier Deep Archive
C. Implement a third-party tool to take images of the SAP application servers and database server Take regular snapshots at 1-hour intervals send the snapshots to Amazon S3 Glacier directly through the S3 Glacier console Store the same images in different S3 buckets in different AWS Regions
D. Take a backup of the production servers Implement an Amazon S3 File Gateway Create file shares by using the S3 File Gateway Copy the backup files to the file shares through NFS and SMB Map backup files directly to Amazon S3 Configure S3 Lifecycle policy to send the backup files to S3 Glacier based on the company\’s data retention policy
Question 15:
A company needs to implement high availability for its SAP S 4HANA system on AWS The company will use a SUSE Linux Enterprise Server clustering solution in private subnets across two Availability Zones An SAP solutions architect must ensure that the solution can route traffic to the active SAP instance m this clustered configuration.
What should the SAP solutions architect do to meet these requirements?
A. Implement the SAP cluster solution by using a secondary private IP address Reassign the secondary private IP address from one network interface to another network interface in the event of any failure that affects the primary instance.
B. Implement the SAP cluster solution by using an Elastic IP address Mask the failure of an instance or software by rapidly remapping the address to another instance in the account
C. Implement the SAP duster solution by using a public IP address Use this public IP address for communication between the instances and the internet
D. implement the SAP duster solution by using an overlay IP address that is outside the CIDR block of the VPC Use overlay IP address routing to dynamically update the routing table to point to the active node and provide external access by using a Network Load Balancer or AWS Transit Gateway.
…
Verify answer:
| Number: | Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
| Answers: | A | D | A | BC | AB | D | BE | AD | D | A | B | BCF | D | C | D |
Every free sharing of Amazon PAS-C01 exam questions is the hard work of our Amazon team, and we hope to help you improve your strength!
Now, use PAS-C01 PDF dumps or PAS-C01 VCE dumps: https://www.leads4pass.com/pas-c01.html (both formats contain the latest exam questions and answers!) Also, get 15% off with code “Amazon”!
If you haven’t started studying for the Amazon PAS-C01 exam, or are still on the sidelines, you can first practice online to improve your strength.
However, if you want to start your PAS-C01 journey early, these Amazon PAS-C01 dumps can still be relevant and useful as you prepare for the exam.
